## How to Light a Honeywell Hot Water Heater
Honeywell hot water heaters are a popular choice for homeowners, as they are known for their reliability and efficiency. However, if you’ve never lit a Honeywell hot water heater before, it can seem like a daunting task. Don’t worry, though! With our step-by-step guide, you’ll be able to light your Honeywell hot water heater quickly and safely.
### Step 1: Gather Your Tools and Materials
Before you start, you’ll need to gather a few tools and materials:
– A Phillips head screwdriver
– A long-nose pliers
– A butane lighter
– A flashlight
– Safety glasses
### Step 2: Turn Off the Gas and Water Supply
Once you have your tools and materials, the first step is to turn off the gas and water supply to your hot water heater. To turn off the gas, locate the gas valve on the gas line that leads to your hot water heater. Turn the valve clockwise to close it. To turn off the water, locate the water shutoff valve on the cold water line that leads to your hot water heater. Turn the valve clockwise to close it.
### Step 3: Open Up the Burner Compartment
Next, you need to open up the burner compartment. To do this, locate the access panel on the front of your hot water heater. The access panel is usually held in place by screws. Use a Phillips head screwdriver to remove the screws and lift off the access panel.
### Step 4: Locate the Igniter and Burner
Once you have the burner compartment open, you’ll need to locate the igniter and burner. The igniter is usually a small, metal rod with a spark plug at the end. The burner is usually a round, metal plate with holes in it.
### Step 5: Light the Igniter
To light the igniter, hold a butane lighter up to the spark plug and depress the button. You should hear a clicking sound and see a spark. Keep the lighter pressed against the spark plug until the igniter glows red-hot.
### Step 6: Turn on the Gas
Once the igniter is glowing red-hot, you can turn on the gas. To do this, slowly turn the gas valve counterclockwise until you hear gas flowing into the burner.
### Step 7: Adjust the Flame
Once the gas is flowing, you need to adjust the flame. To do this, use a long-nose pliers to turn the adjustment screw on the gas valve. Turn the screw clockwise to increase the flame size, and turn it counterclockwise to decrease the flame size.
### Step 8: Close the Burner Compartment
Once you have the flame adjusted, you can close the burner compartment. To do this, simply place the access panel back on the front of the hot water heater and tighten the screws.
### Step 9: Turn on the Water Supply
Finally, you can turn on the water supply to your hot water heater. To do this, locate the water shutoff valve on the cold water line that leads to your hot water heater. Turn the valve counterclockwise to open it.
### Troubleshooting
If you’re having trouble lighting your Honeywell hot water heater, there are a few things you can check:
– Make sure that the gas and water supply is turned on.
– Make sure that the igniter is glowing red-hot.
– Make sure that the flame is adjusted properly.
– Check for any blockages in the gas line or burner.
If you’re still having trouble, you should contact a qualified plumber for assistance.
## Safety Tips
When lighting a Honeywell hot water heater, it’s important to follow these safety tips:
– Always wear safety glasses when working on your hot water heater.
– Never attempt to light your hot water heater if you are not sure how to do it safely.
– If you smell gas, evacuate your home immediately and call 911.
– Do not store flammable materials near your hot water heater.
– Have your hot water heater inspected by a qualified plumber once a year.
By following these safety tips, you can help reduce the risk of accidents when lighting your Honeywell hot water heater.