## How to Lift a Water Heater into a Pan
Lifting a water heater into a pan can be a challenging task, but it can be done safely and effectively with the right tools and techniques. Here are the steps on how to do it:
### 1. Gather Your Tools and Materials
– Water heater
– Pan
– Dolly or hand truck
– Ramps or planks
– Straps or ropes
– Level
– Shims
### 2. Prepare the Water Heater
– Turn off the water supply to the water heater.
– Disconnect the water lines and electrical wires.
– Drain the water from the tank.
– Remove the old water heater from its location.
### 3. Prepare the Pan
– Place the pan in the desired location.
– Level the pan using shims if necessary.
– Create a ramp or use planks to provide a gradual incline from the ground to the pan.
### 4. Lift the Water Heater
– Attach the straps or ropes to the water heater.
– Use the dolly or hand truck to support the water heater.
– Carefully lift the water heater and place it onto the ramp or planks.
– Slowly walk the water heater up the ramp or planks and into the pan.
### 5. Position the Water Heater
– Once the water heater is in the pan, carefully slide it into the desired position.
– Use a level to ensure that the water heater is level.
– Adjust the shims under the pan as needed to level the water heater.
### 6. Secure the Water Heater
– Tighten the straps or ropes to secure the water heater in place.
– Install the water lines and electrical wires.
– Turn on the water supply and check for leaks.
### 7. Test the Water Heater
– Turn on the water heater and let it run for a few minutes.
– Check for any leaks or unusual noises.
– Adjust the temperature setting as needed.
### Tips for Lifting a Water Heater into a Pan
– If the water heater is particularly heavy, you may need to use a lifting jack or hoist.
– Always lift with your legs, not your back.
– Wear gloves and safety glasses when lifting the water heater.
– Be aware of your surroundings and make sure there are no obstacles in your way.
– If you are not comfortable lifting the water heater yourself, hire a professional to do it for you.
### Troubleshooting
– If the water heater is leaking, check the connections for tightness.
– If the water heater is making unusual noises, turn it off and call a qualified technician.
– If the water heater is not heating the water, check the thermostat setting and the heating element.
By following these steps and tips, you can safely and effectively lift a water heater into a pan.