## Why Hot Water Dispensers Typically Dispense Water at 98 Degrees Fahrenheit
Hot water dispensers are a convenient way to get instant hot water for coffee, tea, or other beverages. But why do they always seem to dispense water at 98 degrees Fahrenheit?
There are a few reasons for this.
### Safety
The primary reason hot water dispensers dispense water at 98 degrees Fahrenheit is safety. Water that is too hot can cause serious burns. By setting the water temperature to 98 degrees Fahrenheit, manufacturers can help to prevent accidents.
### Energy Efficiency
Another reason hot water dispensers dispense water at 98 degrees Fahrenheit is energy efficiency. Boiling water requires a lot of energy. By setting the water temperature to 98 degrees Fahrenheit, manufacturers can reduce the amount of energy that the dispenser uses.
### Taste
Finally, hot water dispensers dispense water at 98 degrees Fahrenheit because it is the ideal temperature for brewing coffee and tea. Water that is too hot can make coffee bitter and tea astringent. By setting the water temperature to 98 degrees Fahrenheit, manufacturers can help to ensure that your beverages taste their best.
### Other Factors
In addition to safety, energy efficiency, and taste, there are a few other factors that can affect the temperature of water dispensed from a hot water dispenser. These factors include:
The type of dispenser: Some dispensers are designed to dispense water at a higher temperature than others.
The size of the tank: A larger tank will take longer to heat up, so the water dispensed from a large tank may be cooler than the water dispensed from a small tank.
The ambient temperature: The temperature of the room where the dispenser is located can affect the temperature of the water dispensed.
## How to Adjust the Temperature of Your Hot Water Dispenser
If you find that the water dispensed from your hot water dispenser is too hot or too cold, you may be able to adjust the temperature. Most dispensers have a temperature control knob that you can use to set the desired water temperature.
To adjust the temperature of your hot water dispenser:
1. Locate the temperature control knob. It is usually located on the front or side of the dispenser.
2. Turn the knob to the desired temperature setting.
3. Allow the dispenser to heat up to the new temperature setting. This may take a few minutes.
## Troubleshooting Hot Water Dispenser Temperature Problems
If you are having trouble getting your hot water dispenser to dispense water at the desired temperature, there are a few things you can check:
Make sure that the dispenser is plugged in and turned on.
Check the temperature control knob. Make sure that it is set to the desired temperature.
Allow the dispenser to heat up completely. It may take a few minutes for the dispenser to reach the desired temperature.
Clean the dispenser. Mineral deposits can build up on the heating element, which can affect the water temperature. To clean the dispenser, fill the tank with a mixture of equal parts white vinegar and water. Allow the solution to sit for 30 minutes, then drain and rinse the tank.
Contact the manufacturer. If you have tried all of the above troubleshooting steps and the dispenser is still not dispensing water at the desired temperature, contact the manufacturer.
## Conclusion
Hot water dispensers are a convenient way to get instant hot water for coffee, tea, or other beverages. By setting the water temperature to 98 degrees Fahrenheit, manufacturers can help to ensure that the water is safe, energy efficient, and tastes good. If you are having trouble getting your hot water dispenser to dispense water at the desired temperature, you can try adjusting the temperature control knob, cleaning the dispenser, or contacting the manufacturer.