## Operating Instructions for Haier Water Dispenser
### Step 1: Preparation and Setup
– Unpack the Water Dispenser: Remove all packaging materials and accessories.
– Place the Dispenser: Position the dispenser on a stable, level surface in a well-ventilated area.
– Clean the Reservoir: Remove the water reservoir and clean it thoroughly with warm, soapy water.
– Fill the Reservoir: Fill the reservoir with clean, cold water up to the “MAX” line.
### Step 2: Refrigeration and Dispensing
– Turn on the Dispenser: Plug the dispenser into a grounded electrical outlet and turn it on using the power switch located at the back of the unit.
– Adjust Temperature (Optional): If desired, adjust the refrigeration temperature using the temperature control knob inside the dispenser.
– Dispense Water: Press the cold or hot water dispensing lever to fill a glass or cup.
### Step 3: Hot Water Function
– Caution: Always use extreme caution when dispensing hot water.
– Dispensing Hot Water: Lift the red safety lock lever on the hot water spigot and press the hot water dispensing lever.
– Safety Features: The dispenser is equipped with a safety lock to prevent accidental dispensing of hot water.
### Step 4: Additional Functions
– Child Lock: Activate the child lock by pressing the “Lock” button to prevent unwanted dispensing of water.
– Night Light: Some models have a built-in night light that illuminates the water reservoir.
– Self-Cleaning: Advanced models offer a self-cleaning function that sanitizes the water reservoir regularly.
### Step 5: Maintenance
– Regular Cleaning: Clean the outside of the dispenser with a damp cloth and wipe down the spigots with a disinfectant.
– Reservoir Cleaning: Clean the water reservoir every 2-3 months with a mild bleach solution (1 teaspoon of bleach per gallon of water).
– Filter Replacement (Optional): If your dispenser has a built-in water filter, replace it according to the manufacturer’s recommendations.
### Troubleshooting
| Problem | Possible Cause | Solution |
|—|—|—|
| Dispenser not dispensing water | Empty reservoir | Fill the reservoir with water |
| No refrigeration | Power cord not plugged in | Connect the dispenser to a power source |
| Water tastes bad | Dirty water reservoir | Clean the reservoir thoroughly |
| Hot water not dispensing | Safety lock not lifted | Lift the red safety lock lever |
| Continuous water flow | Faulty valve | Contact a qualified technician |
| Water leaking from dispenser | Loose connection | Tighten all connections |
### Safety Precautions
– Never disassemble or repair the dispenser yourself. Contact a qualified technician for any repairs.
– Keep the power cord away from heat sources and avoid tripping over it.
– Do not overload the water dispenser.
– Supervise children when using the dispenser.
– Never dispense boiling water directly into a glass or cup. Allow it to cool slightly first.
– Regularly clean the water reservoir to prevent bacteria growth.