## How to Turn Off a Primo Water Dispenser
Primo water dispensers are a convenient way to have access to clean, filtered water in your home or office. However, there may be times when you need to turn off the dispenser, such as when you are going on vacation or when you are having the dispenser serviced.
Turning off a Primo water dispenser is a simple process that can be completed in just a few minutes. Here are the steps:
1. Locate the power switch. The power switch is typically located on the back of the dispenser. It is a small, black switch that is labeled “Power.”
2. Flip the power switch to the “Off” position. The dispenser will turn off immediately.
3. Unplug the dispenser from the power outlet. This will ensure that the dispenser is completely turned off and that no power is flowing to it.
Once you have turned off the dispenser, you can follow these steps to turn it back on:
1. Plug the dispenser into a power outlet.
2. Flip the power switch to the “On” position. The dispenser will start up and begin to dispense water.
### Troubleshooting
If you are having trouble turning off your Primo water dispenser, there are a few things you can try:
Make sure that the power switch is in the “Off” position. The switch should be flipped all the way to the “Off” position.
Unplug the dispenser from the power outlet and then plug it back in. This will reset the dispenser and may fix the problem.
Contact Primo customer service. If you are still having trouble turning off your dispenser, you can contact Primo customer service for assistance.
## How to Clean a Primo Water Dispenser
Primo water dispensers should be cleaned regularly to ensure that they are dispensing clean, safe water. Here are the steps on how to clean a Primo water dispenser:
1. Gather your supplies. You will need the following supplies:
A clean cloth
A mild dish soap
A bottle of white vinegar
A soft brush
2. Unplug the dispenser from the power outlet.
3. Remove the water tank. The water tank is located at the top of the dispenser. It is a clear plastic tank that holds the water.
4. Empty the water tank. Pour the water out of the tank into the sink.
5. Wash the water tank. Wash the water tank with a mild dish soap and warm water. Use a soft brush to scrub the inside of the tank.
6. Rinse the water tank. Rinse the water tank thoroughly with clean water.
7. Fill the water tank with white vinegar. Fill the water tank with white vinegar. Let the vinegar sit in the tank for 30 minutes.
8. Empty the water tank. Pour the vinegar out of the tank into the sink.
9. Rinse the water tank. Rinse the water tank thoroughly with clean water.
10. Reinstall the water tank. Place the water tank back on top of the dispenser.
11. Plug the dispenser into the power outlet.
12. Run the dispenser for 5 minutes. This will help to flush out any remaining vinegar from the dispenser.
## How to Change the Filter in a Primo Water Dispenser
The filter in a Primo water dispenser should be changed every 6 months. Here are the steps on how to change the filter in a Primo water dispenser:
1. Gather your supplies. You will need the following supplies:
A new Primo water filter
A clean cloth
2. Unplug the dispenser from the power outlet.
3. Remove the water tank. The water tank is located at the top of the dispenser. It is a clear plastic tank that holds the water.
4. Empty the water tank. Pour the water out of the tank into the sink.
5. Remove the old filter. The old filter is located at the bottom of the water tank. It is a white plastic cylinder that is about 6 inches long.
6. Insert the new filter. Insert the new filter into the bottom of the water tank. The filter should fit snugly into place.
7. Reinstall the water tank. Place the water tank back on top of the dispenser.
8. Plug the dispenser into the power outlet.
9. Run the dispenser for 5 minutes. This will help to flush out any remaining air from the dispenser.
## Safety Tips
Here are a few safety tips to keep in mind when using a Primo water dispenser:
Do not use the dispenser if it is damaged.
Do not plug the dispenser into a power outlet that is not grounded.
Do not place the dispenser near a heat source.
Do not place the dispenser in direct sunlight.
Do not drink the water from the dispenser if it is discolored or has an unusual odor or taste.
If you have any questions about the safety of your Primo water dispenser, please contact Primo customer service.