## How to Take Cover Off NewAir Water Dispenser
### Materials You’ll Need
– Phillips screwdriver
– Flathead screwdriver
– Needle-nose pliers
### Step-by-Step Instructions
#### 1. Unplug the Water Dispenser
Before you begin, unplug the water dispenser from the power outlet. This will prevent any electrical shocks.
#### 2. Remove the Drip Tray
Locate the drip tray at the base of the water dispenser and pull it out.
#### 3. Remove the Screws from the Water Reservoir
On the back of the water dispenser, locate the four screws holding the water reservoir in place. Remove these screws with a Phillips screwdriver.
#### 4. Lift Off the Water Reservoir
Once the screws are removed, gently lift off the water reservoir.
#### 5. Locate the Screws Holding the Cover in Place
On the inside of the water dispenser, you will see two screws holding the cover in place. Remove these screws with a flathead screwdriver.
#### 6. Lift Off the Cover
Once the screws are removed, carefully lift off the cover. You may need to use a little force.
#### 7. Remove the Water Filter (Optional)
If your water dispenser has a built-in water filter, you may need to remove it before you can remove the cover. To do this, turn off the water supply to the dispenser and then use a needle-nose pliers to remove the filter.
#### 8. Disconnect the Electrical Wires (Optional)
If the cover is connected to the electrical wires, you will need to disconnect them before you can remove it. To do this, use a flathead screwdriver to loosen the screws holding the wires in place.
#### 9. Remove the Cover
Once the electrical wires are disconnected, you can remove the cover. Be careful not to damage the cover or the wires.
### Troubleshooting
– The cover is stuck. If the cover is stuck, you may need to use a little force to remove it. You can also try tapping the cover with a rubber mallet.
– The screws are stripped. If the screws are stripped, you will need to use a pair of needle-nose pliers to remove them.
– The electrical wires are damaged. If the electrical wires are damaged, do not attempt to repair them yourself. Call a qualified electrician.
### Tips
– Make sure that the water dispenser is unplugged before you begin.
– Be careful not to damage the cover or the electrical wires.
– If you are having trouble removing the cover, you can consult the user manual for your specific model.