## How to Take Apart a Water Dispenser Oasis
### Tools and Materials
Before you begin, gather the following tools and materials:
– Phillips head screwdriver
– Flathead screwdriver
– Adjustable wrench
– Towel or rag
– Empty bucket or container
– Replacement parts (if necessary)
### Safety Precautions
Before taking apart the water dispenser, be sure to follow these safety precautions:
– Unplug the water dispenser from the electrical outlet.
– Turn off the water supply to the dispenser.
– Empty all water from the dispenser.
– Place a towel or rag under the dispenser to catch any spills.
### Step-by-Step Instructions
1. Remove the front panel.
– Locate the screws on the front panel of the dispenser.
– Use the Phillips head screwdriver to remove the screws.
– Lift the front panel off the dispenser.
2. Remove the water tank.
– Locate the water tank inside the dispenser.
– Use the adjustable wrench to loosen the nuts that hold the water tank in place.
– Lift the water tank out of the dispenser.
3. Remove the water pump.
– Locate the water pump on the back of the dispenser.
– Use the Phillips head screwdriver to remove the screws that hold the water pump in place.
– Disconnect the water pump from the water tank and the water supply line.
4. Remove the condenser.
– Locate the condenser on the back of the dispenser.
– Use the adjustable wrench to loosen the nuts that hold the condenser in place.
– Lift the condenser out of the dispenser.
5. Remove the evaporator.
– Locate the evaporator on the front of the dispenser.
– Use the Phillips head screwdriver to remove the screws that hold the evaporator in place.
– Disconnect the evaporator from the water pump and the condenser.
6. Remove the thermostat.
– Locate the thermostat on the top of the dispenser.
– Use the flathead screwdriver to remove the screws that hold the thermostat in place.
– Disconnect the thermostat from the water pump.
7. Reassemble the water dispenser.
– Once you have removed all of the parts, you can reassemble the water dispenser in the reverse order.
– Be sure to tighten all of the screws and nuts securely.
8. Test the water dispenser.
– Once the water dispenser is reassembled, plug it back into the electrical outlet.
– Turn on the water supply to the dispenser.
– Fill the water tank with water.
– The water dispenser should now be working properly.
### Troubleshooting
If you are having trouble taking apart the water dispenser, consult the following troubleshooting tips:
– The screws are stripped. If the screws are stripped, you can use a pair of pliers to grip the screws and remove them.
– The nuts are rusted. If the nuts are rusted, you can use a penetrating oil to loosen them.
– The water tank is stuck. If the water tank is stuck, you can use a rubber mallet to gently tap the tank until it loosens.
– The water pump is not working. If the water pump is not working, you can try replacing the pump.
– The condenser is not working. If the condenser is not working, you can try replacing the condenser.
– The evaporator is not working. If the evaporator is not working, you can try replacing the evaporator.
– The thermostat is not working. If the thermostat is not working, you can try replacing the thermostat.
### Conclusion
Taking apart a water dispenser is a relatively simple task that can be completed in about 30 minutes. By following the steps in this article, you can easily troubleshoot and repair your water dispenser.