## How to Take Apart a Samsung Water Dispenser
If your Samsung water dispenser is not working properly, you may need to take it apart to troubleshoot the problem. Here are the steps on how to do it:
### Tools You’ll Need
Phillips head screwdriver
Flathead screwdriver
Needle-nose pliers
### Step-by-Step Instructions
1. Unplug the water dispenser from the power outlet.
This is a safety precaution to prevent electric shock.
2. Remove the water reservoir.
The water reservoir is located at the top of the water dispenser. Pull it straight up to remove it.
3. Remove the front panel.
The front panel is held in place by two screws. Remove the screws and then pull the panel straight out.
4. Remove the top cover.
The top cover is held in place by two screws. Remove the screws and then pull the cover straight up.
5. Remove the water filter.
The water filter is located at the back of the water dispenser. Pull it straight out to remove it.
6. Remove the water pump.
The water pump is located at the bottom of the water dispenser. Remove the two screws that hold it in place and then pull it straight out.
7. Remove the water lines.
The water lines are connected to the water pump and the water reservoir. Use a pair of needle-nose pliers to disconnect the lines.
8. Remove the electronic control board.
The electronic control board is located at the back of the water dispenser. Remove the two screws that hold it in place and then pull it straight out.
9. Remove the water dispenser from the base.
The water dispenser is held in place by four screws. Remove the screws and then pull the water dispenser straight up from the base.
### Troubleshooting Tips
If you are having trouble taking apart your Samsung water dispenser, here are a few tips:
Make sure that you have the correct tools.
Be careful not to damage any of the components.
If you are not sure how to do something, consult a qualified technician.
### Reassembly Instructions
Once you have taken apart your Samsung water dispenser, you can reassemble it by following the steps in reverse order.
1. Place the water dispenser on the base.
2. Insert the electronic control board.
3. Connect the water lines.
4. Insert the water pump.
5. Insert the water filter.
6. Place the top cover.
7. Place the front panel.
8. Insert the water reservoir.
9. Plug the water dispenser into the power outlet.
### Conclusion
Taking apart a Samsung water dispenser is not a difficult task. By following the steps in this article, you can do it yourself in just a few minutes. If you are having any trouble, be sure to consult a qualified technician.