## How to Set Up a Culligan Water Dispenser
Installing and setting up a Culligan water dispenser is a simple process that can be completed in a few easy steps. By following these instructions carefully, you can ensure that your dispenser is set up correctly and ready to provide you with fresh, clean water.
### Unpacking and Inspecting the Dispenser
1. Carefully unpack the dispenser from its packaging, making sure to remove all protective materials.
2. Check the dispenser for any damage that may have occurred during shipping. If you notice any damage, contact Culligan immediately.
### Choosing a Location for the Dispenser
1. Select a location for the dispenser that is convenient and easily accessible.
2. The dispenser should be placed on a flat, stable surface that is able to support its weight.
3. Ensure that there is enough space around the dispenser to allow for proper airflow and easy access to the controls.
### Connecting the Water Line
1. Connect the water line to the back of the dispenser. Make sure that the connection is tight and secure.
2. Turn on the water supply and check for any leaks. If you notice any leaks, tighten the connection or contact Culligan for assistance.
### Priming the Water System
1. Place a large container under the dispensing spout.
2. Press and hold the cold water button for 5 seconds. The dispenser will begin to prime the water system.
3. Allow the water to run until it is clear and free of any air bubbles.
### Installing the Water Filter
1. Remove the old water filter from the dispenser.
2. Insert the new water filter into the dispenser. Make sure that the filter is securely in place.
3. Reset the filter indicator light by pressing and holding the reset button for 5 seconds.
### Setting the Temperature
1. Press the temperature button to adjust the temperature of the cold water.
2. The dispenser offers a range of temperature settings, so you can choose the temperature that best suits your preference.
### Using the Dispenser
1. Press the cold water button to dispense cold water.
2. Press the hot water button to dispense hot water.
3. Note that the hot water button may have a safety lock feature to prevent accidental activation.
### Troubleshooting Common Issues
1. No water is dispensing. Check the water supply and make sure that it is turned on. Also, check the water line connection to ensure that it is tight and secure.
2. The water is not cold enough. Adjust the temperature setting to a colder temperature. Allow the dispenser to run for a few minutes to reach the desired temperature.
3. The water has a strange taste or odor. Replace the water filter. Also, check the water supply for any contaminants.
4. The dispenser is making a strange noise. Contact Culligan for assistance.
### Additional Tips
Change the water filter regularly to ensure that you are getting the best quality water.
Clean the dispenser regularly to prevent the buildup of bacteria and mold.
If you are not using the dispenser for an extended period of time, drain the water from the system and unplug the dispenser.
## Maintenance and Care
Weekly Maintenance:
Wipe down the exterior of the dispenser with a clean, damp cloth.
Check the water line connection for any leaks.
Monthly Maintenance:
Clean the dispensing spout with a clean, damp cloth.
Replace the water filter.
Quarterly Maintenance:
Deep clean the dispenser by following the manufacturer’s instructions.
Check the water line for any damage or wear.
Annual Maintenance:
Schedule a professional maintenance service with Culligan.
### Contacting Culligan
If you have any questions or encounter any problems with your Culligan water dispenser, please contact Culligan for assistance. You can reach Culligan by phone, email, or online chat.