## How to Remove a Beko Water Dispenser Lever
### Tools and Equipment
– Phillips head screwdriver
– Flathead screwdriver (optional)
– Pliers (optional)
### Safety Precautions
– Unplug the refrigerator from the power outlet before starting.
– Wear gloves to protect your hands from sharp edges.
### Step-by-Step Instructions
#### 1. Remove the Water Dispenser Cover
– Use a Phillips head screwdriver to remove the two screws securing the water dispenser cover.
– Gently pull the cover straight off the refrigerator.
#### 2. Locate the Lever Release Button
– On the left side of the water dispenser, you will see a small, black button. This is the lever release button.
#### 3. Press the Lever Release Button
– Push and hold the lever release button. The lever should pop out slightly.
#### 4. Pull the Lever Outward
– While holding the lever release button, pull the lever straight outward. It should come off easily.
#### 5. Remove the Lever Cap
– The lever cap is the small, plastic piece that covers the top of the lever. It may be attached with a screw or a snap-fit mechanism.
– If there is a screw, use a Phillips head screwdriver to remove it.
– If it is a snap-fit, gently pry it off with a flathead screwdriver or your fingernails.
#### 6. Clean the Lever Assembly
– If desired, you can clean the lever assembly with a damp cloth and a mild detergent.
– Allow it to dry completely before reassembling.
#### 7. Reassemble the Water Dispenser Lever
– Insert the lever into the water dispenser housing.
– Push the lever inward until it is seated properly.
– Replace the lever cap.
– Press on the lever to ensure it is functioning properly.
#### 8. Replace the Water Dispenser Cover
– Align the water dispenser cover with the refrigerator and press it into place.
– Insert the two screws and tighten them with a Phillips head screwdriver.
– Plug the refrigerator back into the power outlet.
### Troubleshooting
– The lever will not come out:
– Make sure you are pressing the lever release button firmly.
– If the lever is stuck, try using a pair of pliers to gently pull it out.
– The lever cap is broken:
– If the lever cap is broken, you can purchase a replacement from Beko or a third-party retailer.
– The water dispenser is not working:
– After reassembling the water dispenser, run some water through it to ensure that it is working properly.
– If the water dispenser is still not working, there may be another issue with the refrigerator. Contact a qualified appliance repair technician for assistance.
### Additional Tips
– If you are having difficulty removing the water dispenser cover, you can try using a putty knife or a thin pry bar to gently separate it from the refrigerator.
– Be careful not to scratch or damage the refrigerator when removing or replacing the water dispenser lever.
– If you are not comfortable performing this repair yourself, you can contact Beko customer service or a qualified appliance repair technician for assistance.