## How to Refill a PUR Water Dispenser
Keeping your PUR water dispenser filled is essential for ensuring you have clean, fresh water on hand. The process is simple and can be completed in a few easy steps.
### Materials You’ll Need:
– PUR water dispenser
– PUR water filter cartridge
– Clean water source
– Container or pitcher
– Towel or cloth
### Step-by-Step Instructions:
1. Remove the Old Cartridge:
– Unplug the water dispenser and remove the lid.
– Locate the old filter cartridge and pull it straight down to remove it. Discard the old cartridge.
2. Insert the New Cartridge:
– Unwrap the new PUR water filter cartridge and remove the protective caps.
– Insert the new cartridge into the housing, aligning it properly.
– Push the cartridge up firmly until it clicks into place.
3. Fill the Reservoir:
– Using a clean container or pitcher, fill the reservoir with clean water from a reliable source. Avoid using water from a contaminated source or water that may contain harmful substances.
– Fill the reservoir up to the indicated maximum fill line.
4. Reset the Filter Indicator:
– Once the reservoir is full, press and hold the reset button on the top of the dispenser until the LED filter indicator light turns green. This will reset the filter’s lifespan tracker.
5. Flush the System:
– Dispense and discard the first two to three glasses of water to flush the system and remove any air bubbles or debris.
– This step is important to ensure that the water you’re drinking is filtered properly.
6. Enjoy Fresh, Clean Water:
– After flushing the system, your PUR water dispenser is ready to use. Enjoy the convenience of having clean, filtered water at your fingertips.
### Tips:
– Regularly replace the PUR water filter cartridge every 2-3 months or as recommended by the manufacturer. This will ensure optimal filtration and water quality.
– Clean the water reservoir periodically to prevent bacteria or algae buildup.
– If the water dispenser produces a humming or buzzing noise, it may be due to air bubbles in the system. Flush the system again to remove the bubbles.
– If you notice a strange taste or odor in the water, replace the filter immediately and contact the manufacturer for assistance.
### Frequently Asked Questions:
1. How often should I replace the PUR water filter cartridge?
– Every 2-3 months or as recommended by the manufacturer.
2. How can I tell if the PUR water filter cartridge needs to be replaced?
– The LED filter indicator light will turn red when the filter needs to be replaced.
3. Can I use tap water in the PUR water dispenser?
– Yes, but it is recommended to use clean, filtered water from a reliable source for optimal results.
4. How do I clean the PUR water reservoir?
– Unplug the dispenser and remove the lid. Wash the reservoir with a mild detergent and warm water, then rinse thoroughly and dry completely before reassembling.
5. What do I do if my PUR water dispenser is leaking?
– Contact the manufacturer immediately for assistance.