## How to Prime a Primo Water Dispenser
Primo water dispensers are a convenient way to have cold, refreshing water on hand at all times. However, before you can start using your dispenser, you need to prime it. Priming the dispenser removes any air from the system and ensures that the water flows smoothly.
### Step-by-Step Instructions
1. Gather your materials. You will need the following:
Primo water dispenser
5-gallon bottle of water
Cup or glass
2. Wash your hands. This will help to prevent bacteria from getting into the water dispenser.
3. Remove the cap from the water bottle.
4. Insert the water bottle into the dispenser. Make sure that the bottle is inserted all the way and that it is sitting securely in the base.
5. Open the spigot. Allow the water to flow out of the spigot until it is clear of any air bubbles. This may take a few seconds.
6. Close the spigot.
7. Fill a cup or glass with water.
8. Enjoy your fresh, cold water!
### Tips
If you are having trouble getting the water to flow, try gently shaking the water bottle.
If you are still having trouble, you can try removing the water bottle and reinserting it.
If you are using a new water bottle, make sure that the seal is not broken.
### Troubleshooting
Water is not flowing out of the spigot.
Make sure that the water bottle is inserted all the way and that it is sitting securely in the base.
Open the spigot all the way.
Try gently shaking the water bottle.
Remove the water bottle and reinserting it.
Make sure that the seal on the water bottle is not broken.
Water is flowing out of the spigot, but it is not cold.
Make sure that the water bottle is cold.
Place the water dispenser in a cool location.
Allow the water dispenser to run for a few minutes to cool down the water lines.
Water is leaking from the dispenser.
Check the seals on the water bottle and the dispenser.
Make sure that the water bottle is inserted all the way and that it is sitting securely in the base.
Tighten the spigot.
### Frequently Asked Questions
How often should I prime my Primo water dispenser?
You should prime your Primo water dispenser every time you change the water bottle.
Can I use tap water in my Primo water dispenser?
No, you should not use tap water in your Primo water dispenser. Tap water contains impurities that can damage the dispenser and affect the taste of the water.
How long will a 5-gallon bottle of water last in my Primo water dispenser?
A 5-gallon bottle of water will last approximately 2 weeks in a Primo water dispenser.
How do I clean my Primo water dispenser?
You should clean your Primo water dispenser every 2-3 months. To clean the dispenser, follow these steps:
1. Unplug the dispenser and remove the water bottle.
2. Wash the inside of the dispenser with a mild soap and water solution.
3. Rinse the dispenser thoroughly with clean water.
4. Dry the dispenser with a clean cloth.
5. Reinsert the water bottle and plug in the dispenser.