## How to Open a Water Dispenser Cooler Tap
### Step-by-Step Instructions:
1. Locate the tap lever: The tap lever is typically located on the front or side of the water dispenser cooler. It may be a small, plastic or metal handle or lever.
2. Identify the tap type: There are two main types of water dispenser taps:
– Push-button: These taps are activated by pressing a button on the tap lever.
– Lever-style: These taps are activated by pushing or pulling the tap lever.
3. Operate the tap:
For push-button taps:
– Press the button on the tap lever firmly.
– Release the button to stop the flow of water.
For lever-style taps:
– Push the tap lever down to dispense water.
– Pull the tap lever up to stop the flow of water.
### Common Issues and Troubleshooting:
1. The tap is stuck or doesn’t open:
– Push-button taps:
– Check if the button is obstructed by any debris or dirt.
– Clean the button with a damp cloth or cotton swab.
– If the button is still stuck, contact the manufacturer for assistance.
-Lever-style taps:
– Check if the lever is obstructed by any debris or dirt.
– Clean the lever with a damp cloth or cotton swab.
– If the lever is still stuck, contact the manufacturer for assistance.
2. The water flow is weak or slow:
– Check if the water line is connected securely to the dispenser.
– Check if the water filter (if present) needs to be replaced.
– Contact the manufacturer for further troubleshooting if the issue persists.
3. The tap leaks:
– Check if the tap gasket needs to be replaced.
– Contact the manufacturer for assistance with replacing the gasket.
### Tips for Maintaining Water Dispenser Taps:
– Clean the tap regularly with a damp cloth or cotton swab to remove any debris or dirt.
– Regularly inspect the tap for any damage or leaks.
– Replace the water filter (if present) according to the manufacturer’s instructions.
– If you experience any issues with the tap, contact the manufacturer for assistance.
### Additional Notes:
– Some water dispenser coolers have child safety locks on the tap. Refer to the manufacturer’s instructions to disable the lock if necessary.
– If you are using a water dispenser cooler for the first time, run a few glasses of water through the tap to remove any air bubbles or sediment.
– Always use filtered or purified water in your water dispenser cooler to ensure the best water quality.