## A Comprehensive Guide to Opening a Sparkletts Water Dispenser
Sparkletts water dispensers offer a convenient and refreshing way to enjoy sparkling water at home. Whether you’re hosting a party or simply want to enjoy a bubbly beverage, opening a Sparkletts water dispenser is a straightforward process.
### Gathering Necessary Materials
Before you begin, gather the following materials:
– Sparkletts water dispenser
– Sparkletts CO2 cylinder
– Wrench or adjustable pliers
– Phillips head screwdriver
– Water bottle (optional)
### Step 1: Install the CO2 Cylinder
1. Disconnect the CO2 cylinder from the dispenser by turning the valve counterclockwise.
2. Using the wrench or pliers, remove the cap from the end of the CO2 cylinder.
3. Insert the CO2 cylinder into the dispenser, aligning the threads with the opening.
4. Tighten the cylinder by turning it clockwise using the wrench or pliers.
### Step 2: Connect the Water Bottle
If you’re using a water bottle with your dispenser, follow these steps:
1. Remove the cap from the water bottle.
2. Invert the water bottle and insert the bottle’s opening into the dispenser’s spout.
3. Turn the bottle clockwise to secure it in place.
### Step 3: Prime the Dispenser
1. Turn the power switch on.
2. Press and hold the dispense button for 5-10 seconds, until water begins to flow.
3. Release the dispense button.
4. Repeat this process 2-3 times to fully prime the dispenser.
### Step 4: Adjust the Carbonation Level
The amount of carbonation in your water can be adjusted using the following steps:
1. Turn the carbonation adjustment knob clockwise to increase the carbonation.
2. Turn the knob counterclockwise to decrease the carbonation.
3. Experiment with different settings to find the optimal carbonation level for your taste.
### Troubleshooting Common Issues
Water is not dispensing:
– Ensure that the water bottle is properly connected or that the CO2 cylinder is installed correctly.
– Check if the power switch is turned on.
– Prime the dispenser by pressing and releasing the dispense button several times.
Water is too flat:
– Increase the carbonation level by turning the adjustment knob clockwise.
– Replace the CO2 cylinder if it is empty or nearing the end of its life.
Water is too fizzy:
– Decrease the carbonation level by turning the adjustment knob counterclockwise.
– Vent the excess CO2 by pressing and releasing the dispense button without water in the bottle.
### Additional Tips
– Clean the water dispenser regularly to ensure optimal performance.
– Use filtered water for the best taste and to prevent mineral buildup.
– Store the CO2 cylinder in a cool, dry place.
– If you’re not using the dispenser for an extended period, turn off the power switch and disconnect the CO2 cylinder.
By following these steps, you can easily open and use your Sparkletts water dispenser, enjoying refreshing sparkling water on demand.