## How to Make an Electric Water Dispenser
An electric water dispenser is a convenient way to access clean, filtered water. It can be used in the home, office, or other public spaces. Making your own electric water dispenser is a relatively simple project that can be completed in a few hours.
### Materials
5-gallon water bottle
Electric water pump
Plastic bucket
PVC pipe
PVC cutter
PVC glue
Drill
Screws
Electrical tape
### Instructions
1. Cut the PVC pipe. You will need to cut the PVC pipe to the desired length for the dispenser. The length will depend on the size of the water bottle and the bucket.
2. Drill holes in the PVC pipe. Drill two holes in the PVC pipe, one near the top and one near the bottom. The holes should be large enough to fit the water pump.
3. Attach the water pump to the PVC pipe. Insert the water pump into the holes in the PVC pipe and secure it with screws.
4. Connect the water pump to the water bottle. Connect the water pump to the water bottle using a hose.
5. Place the PVC pipe in the bucket. Place the PVC pipe in the bucket and secure it with screws.
6. Fill the bucket with water. Fill the bucket with water until it reaches the top of the PVC pipe.
7. Plug in the water pump. Plug in the water pump and turn it on. The water pump will start pumping water from the water bottle into the bucket.
8. Dispense water. To dispense water, simply press the button on the water pump. The water will flow out of the spout at the top of the PVC pipe.
### Tips
Use a food-grade bucket to ensure that the water is safe to drink.
Clean the water dispenser regularly to prevent the growth of bacteria.
If you are using a large water bottle, you may need to use a larger bucket.
You can add a filter to the water dispenser to remove impurities.
### Troubleshooting
The water pump is not working. Check the power cord to make sure that it is plugged in and that the switch is turned on. If the power cord is plugged in and the switch is turned on, the water pump may be defective.
The water is not flowing out of the spout. Check the hose to make sure that it is not kinked. If the hose is not kinked, the water pump may be clogged.
The water is leaking. Check the connections between the water pump, the PVC pipe, and the water bottle to make sure that they are tight. If the connections are tight, the water pump may be leaking.
### Conclusion
Making your own electric water dispenser is a relatively simple project that can be completed in a few hours. By following these instructions, you can create a convenient and affordable way to access clean, filtered water.