## How to Clean Sub Zero Water Dispenser
Sub-Zero water dispensers are known for their high quality and durability, but like any appliance, they need to be cleaned regularly to keep them working properly. Cleaning your Sub-Zero water dispenser is a simple task that can be completed in just a few minutes.
### Materials You’ll Need
White vinegar
Baking soda
Soft cloths
Toothbrush (optional)
### Instructions
1. Unplug the water dispenser. This is an important safety precaution to take before cleaning any electrical appliance.
2. Remove the water filter. The water filter is located at the bottom of the water dispenser. Twist it counterclockwise to remove it.
3. Fill the water dispenser with a solution of white vinegar and water. The ratio of vinegar to water should be 1:1.
4. Let the solution sit for 30 minutes. This will give the vinegar time to dissolve any mineral deposits or other build-up that may have accumulated in the water dispenser.
5. Drain the solution. Once the 30 minutes is up, drain the vinegar solution from the water dispenser.
6. Rinse the water dispenser with water. Run fresh water through the water dispenser for several minutes to rinse away any remaining vinegar.
7. Wipe down the exterior of the water dispenser. Use a soft cloth to wipe down the exterior of the water dispenser. This will remove any dust or fingerprints.
8. Clean the water filter. Soak the water filter in a solution of white vinegar and water for 30 minutes. Then, rinse the water filter thoroughly with water.
9. Reinstall the water filter. Once the water filter is clean, reinstall it in the water dispenser.
10. Plug in the water dispenser. Once the water filter is reinstalled, plug in the water dispenser.
### Tips
Clean your Sub-Zero water dispenser every 6 months to keep it working properly.
If your water dispenser is heavily used, you may need to clean it more often.
If you have hard water, you may need to use a descaling solution to remove mineral deposits from the water dispenser.
Never use abrasive cleaners to clean your Sub-Zero water dispenser.
### Troubleshooting
If you are having problems cleaning your Sub-Zero water dispenser, here are a few troubleshooting tips:
The water dispenser is not dispensing water. Check to make sure that the water filter is installed properly. If the water filter is installed properly, the problem may be with the water supply. Check to make sure that the water supply is turned on and that there are no kinks in the water line.
The water dispenser is making a noise. The water dispenser may be making a noise if there is air in the water line. To remove the air from the water line, run water through the water dispenser for several minutes.
The water dispenser is leaking water. The water dispenser may be leaking water if there is a crack in the water line. Check the water line for any cracks or leaks. If you find a crack or leak, replace the water line.
## Cleaning the Sub Zero Ice Maker
The Sub-Zero ice maker is a complex appliance that requires regular cleaning to keep it working properly. Cleaning the ice maker is a more involved process than cleaning the water dispenser, but it is still a task that can be completed in a few minutes.
### Materials You’ll Need
White vinegar
Baking soda
Soft cloths
Toothbrush (optional)
Screwdriver (optional)
### Instructions
1. Unplug the ice maker. This is an important safety precaution to take before cleaning any electrical appliance.
2. Remove the ice bin. The ice bin is located at the bottom of the ice maker. Lift it up and out to remove it.
3. Fill the ice maker with a solution of white vinegar and water. The ratio of vinegar to water should be 1:1.
4. Let the solution sit for 30 minutes. This will give the vinegar time to dissolve any mineral deposits or other build-up that may have accumulated in the ice maker.
5. Drain the solution. Once the 30 minutes is up, drain the vinegar solution from the ice maker.
6. Rinse the ice maker with water. Run fresh water through the ice maker for several minutes to rinse away any remaining vinegar.
7. Clean the ice bin. Wash the ice bin with warm soapy water. Rinse the ice bin thoroughly with water and dry it completely.
8. Reinstall the ice bin. Once the ice bin is clean, reinstall it in the ice maker.
9. Clean the exterior of the ice maker. Use a soft cloth to wipe down the exterior of the ice maker. This will remove any dust or fingerprints.
10. Clean the ice maker’s condenser coils. The condenser coils are located at the back of the ice maker. Use a vacuum cleaner to remove any dust or debris from the condenser coils.
11. Plug in the ice maker. Once the ice maker is clean, plug it in.
### Troubleshooting
If you are having problems cleaning your Sub-Zero ice maker, here are a few troubleshooting tips:
The ice maker is not making ice. Check to make sure that the ice maker is plugged in and that the water supply is turned on. If the ice maker is plugged in and the water supply is turned on, the problem may be with the ice maker’s thermostat. The thermostat is located at the back of the ice maker. To replace the thermostat, you will need to remove the back panel of the ice maker.
The ice maker is making too much ice. The ice maker may be making too much ice if the thermostat is set too high. To adjust the thermostat, remove the back panel of the ice maker and locate the thermostat. Turn the thermostat dial to a lower setting.
The ice maker is making cloudy ice. The ice maker may be making cloudy ice if the water filter is dirty. To replace the water filter, remove the back panel of the ice maker and locate the water filter. Twist the water filter counterclockwise to remove it. Install a new water filter in the ice maker.