## How to Clean a Menehune Water Dispenser
### Materials You’ll Need:
– White vinegar
– Warm water
– Soft cloths
– Baking soda (optional)
– Bottle brush (optional)
### Step-by-Step Instructions:
#### 1. Unplug and Disassemble the Dispenser:
– Unplug the dispenser from the power outlet.
– Remove the water reservoir and place it in the sink.
– Detach any removable parts, such as the lid, spout, and drip tray.
#### 2. Fill the Reservoir with Vinegar Solution:
– Mix equal parts white vinegar and warm water in the reservoir.
– Allow the solution to sit for 30 minutes to dissolve any mineral deposits or bacteria.
#### 3. Clean the Removable Parts:
– Immerse the lid, spout, and drip tray in a separate solution of vinegar and warm water.
– Use a soft cloth to gently wipe down the parts to remove any visible debris.
#### 4. Brush the Interior of the Reservoir (Optional):
– If your dispenser has a removable reservoir, you can use a bottle brush to gently scrub the interior surfaces.
– This step is not necessary if the reservoir is relatively new or clean.
#### 5. Rinse Thoroughly:
– Once the solution has sat for 30 minutes, drain the reservoir and rinse it thoroughly with cold water.
– Rinse the removable parts as well.
#### 6. Reassemble the Dispenser:
– Reassemble the dispenser once all parts are clean and dry.
– Fill the reservoir with fresh water and plug in the unit.
#### 7. Run a Cleaning Cycle (Optional):
– If your dispenser has a cleaning cycle function, run it for a few minutes to flush out any remaining vinegar or debris.
#### 8. Wipe Down the Exterior:
– Use a soft cloth dampened with warm water to wipe down the exterior of the dispenser.
#### 9. Regular Maintenance:
– Clean your Menehune water dispenser monthly to keep it functioning properly and prevent the buildup of scale or bacteria.
– If you live in a hard water area, you may need to clean the dispenser more frequently.
### Additional Tips:
– If you notice a buildup of scale on the dispenser, you can use a baking soda solution to remove it. Mix baking soda and water to form a paste, then apply it to the affected areas and let it sit for 15-20 minutes. Rinse thoroughly with water afterwards.
– If your dispenser has a removable filter, replace it every 2-3 months to ensure optimal water quality.
– Avoid using harsh chemicals or abrasive cleaners on the dispenser, as they can damage the surfaces.