## How to Clean an InSinkErator Hot Water Dispenser
InSinkErator hot water dispensers provide a convenient and energy-efficient way to get instant hot water for a variety of tasks, from making tea and coffee to filling pots and pans. However, like any appliance, they require regular cleaning to ensure optimal performance and prevent the buildup of scale and bacteria. Here’s a step-by-step guide on how to clean your InSinkErator hot water dispenser:
### Materials you’ll need:
– White vinegar or CLR cleaner
– Clean cloths or sponges
– Measuring cup or syringe
– Screwdriver (optional)
### Safety Precautions:
– Always unplug the hot water dispenser before cleaning.
– Allow the dispenser to cool completely before handling any internal components.
– Wear gloves to protect your hands from hot water and cleaning solutions.
– Follow the manufacturer’s instructions carefully to avoid damaging the dispenser.
### Step-by-Step Cleaning Instructions:
1. Flush the Tank:
– Fill a measuring cup or syringe with 2 cups of white vinegar or CLR cleaner.
– Pour the solution into the hot water tank through the dispensing spout.
– Allow the solution to sit in the tank for 30 minutes to dissolve any scale or buildup.
– Turn on the hot water dispenser and flush the solution through for about 5 minutes to rinse the tank.
2. Clean the Dispense Valve:
– Remove the dispense valve assembly by unscrewing the retainer nut located underneath the spout.
– Soak the dispense valve in a solution of white vinegar or CLR cleaner for 15-20 minutes.
– Use a clean cloth or sponge to gently scrub any debris or buildup from the valve.
– Rinse the valve thoroughly with clean water and reassemble it.
3. Clean the Reservoir:
– Remove the reservoir cover by unscrewing the screws located on the side or back of the dispenser.
– Use a clean cloth or sponge to wipe down the inside of the reservoir to remove any scale or debris.
– If necessary, use a vinegar solution to remove stubborn buildup.
– Rinse the reservoir thoroughly with clean water and reassemble it.
4. Clean the Exterior:
– Use a damp cloth to wipe down the exterior of the dispenser to remove any dirt or smudges.
– Avoid using abrasive cleaners or sponges, as they can scratch the surface.
5. Reassemble and Test:
– Reassemble all the components of the hot water dispenser.
– Plug the dispenser back in and turn it on.
– Run hot water through the dispenser for a few minutes to flush out any remaining cleaning solution.
Additional Tips:
– To prevent scale buildup, it’s recommended to use filtered water in your InSinkErator hot water dispenser.
– Regularly inspect the dispense valve and reservoir for any wear or tear.
– If you have hard water, you may need to clean the dispenser more frequently.
– If you encounter any issues during the cleaning process, consult the manufacturer’s manual or contact customer support.
Troubleshooting:
– If the hot water dispenser is not dispensing hot water, check if it is plugged in and the circuit breaker is not tripped.
– If the water flow is slow or intermittent, clean the dispense valve and reservoir as described above.
– If the water has a strange odor or taste, flush the tank and dispense valve with a vinegar solution and then rinse thoroughly with clean water.
– If you are still experiencing issues, contact InSinkErator customer support for assistance.
By following these simple cleaning instructions, you can keep your InSinkErator hot water dispenser running smoothly and efficiently for years to come.