## How to Clean a Bergen Water Dispenser
Materials You’ll Need:
White vinegar
Baking soda
Soft cloths or sponges
Toothpicks or cotton swabs
Bucket or large container
## Step-by-Step Cleaning Instructions
### 1. Unplug and Disassemble the Dispenser
Unplug the water dispenser from the electrical outlet.
Remove the water reservoir and empty it.
Disassemble the dispenser by separating the top and bottom parts.
### 2. Clean the Water Reservoir
Fill the water reservoir with a mixture of 1 part white vinegar to 1 part water.
Let the solution sit for 30 minutes to dissolve any mineral buildup.
Rinse the reservoir thoroughly with clean water.
### 3. Clean the Top Part of the Dispenser
Wipe down the top part of the dispenser with a soft cloth dampened with white vinegar.
Pay special attention to the areas where water flows, such as the spout and drip tray.
Rinse the top part with clean water and wipe it dry.
### 4. Clean the Bottom Part of the Dispenser
Fill a bucket or large container with a mixture of 1 part baking soda to 1 part water.
Submerge the bottom part of the dispenser in the solution and let it soak for 15 minutes.
Use a soft sponge or cloth to scrub away any grime or mineral buildup.
Rinse the bottom part with clean water and wipe it dry.
### 5. Clean the Spout and Drip Tray
Use a toothpick or cotton swab to remove any debris or mineral deposits from the spout.
Wash the spout with a mixture of white vinegar and water.
Rinse the spout thoroughly with clean water and wipe it dry.
Clean the drip tray with the same vinegar solution and wipe it dry.
### 6. Reassemble and Sanitize the Dispenser
Reassemble the dispenser by attaching the top and bottom parts.
Fill the water reservoir with fresh water and run the dispenser to flush out any residual vinegar or baking soda solution.
Sanitize the dispenser by wiping it down with a cloth dampened with a commercial sanitizer.
### 7. Regular Maintenance
To keep your Bergen water dispenser clean and functioning properly, follow these regular maintenance tips:
Change the water filter every 6 months.
Clean the water reservoir every 2 weeks with a vinegar solution.
Clean the top and bottom parts of the dispenser every month with a baking soda solution.
Sanitize the dispenser every 3 months with a commercial sanitizer.
## Troubleshooting Common Bergen Water Dispenser Problems
### 1. Water Leaking from the Dispenser
Check the connections between the water reservoir and the dispenser.
Inspect the spout for any cracks or damage.
Clean the drip tray and ensure it is properly attached.
### 2. Dispenser Not Dispensing Water
Make sure the water reservoir is full.
Check the water filter and replace it if necessary.
Clean the spout to remove any blockages.
Reset the dispenser by unplugging it for 30 seconds and then plugging it back in.
### 3. Dispenser Making Strange Noises
Clean the water pump to remove any debris or mineral deposits.
Inspect the water reservoir for any loose parts or damage.
Contact Bergen customer support if the noise persists.
### 4. Dispenser Display Not Working
Check the power cord and make sure it is properly plugged in.
Try resetting the dispenser by unplugging it for 30 seconds and then plugging it back in.
Contact Bergen customer support if the display remains blank.
## Conclusion
By following these cleaning and maintenance instructions, you can keep your Bergen water dispenser in optimal condition for years to come. Regular cleaning will prevent mineral buildup, ensure proper water flow, and extend the life of your appliance.