## How to Clean an Avanti Water Dispenser
Keeping your Avanti water dispenser clean is essential for maintaining its hygiene and ensuring the quality of the water it dispenses. Here’s a comprehensive guide to help you effectively clean your Avanti water dispenser:
Materials You’ll Need:
– White vinegar
– Baking soda
– Soft cloths or sponges
– Soft-bristled brush (optional)
– Bucket or large bowl
– Clean, empty water bottle (optional)
Step 1: Unplug and Empty the Dispenser
Before starting, unplug the water dispenser from the power outlet and empty any remaining water from the reservoir and drip tray. Discard the old water.
Step 2: Prepare the Cleaning Solution
a. Vinegar Solution: In a bucket or large bowl, mix equal parts white vinegar and water.
b. Baking Soda Paste: Create a paste by mixing baking soda with a small amount of water.
Step 3: Clean the Exterior
Use a soft, damp cloth to wipe down the exterior of the dispenser, including the control panel, buttons, and spout. If necessary, use a soft-bristled brush to remove any stubborn dirt or debris.
Step 4: Clean the Reservoir
a. Vinegar Solution: Fill the water reservoir with the vinegar solution. Let it sit for 30-60 minutes to soak and dissolve any scale or mineral buildup.
b. Baking Soda Paste: If the vinegar solution is ineffective, try using the baking soda paste. Apply it to the reservoir walls and scrub gently with a soft-bristled brush. Leave it to sit for 15-30 minutes before rinsing.
Step 5: Rinse the Reservoir
Thoroughly rinse the reservoir with clean water several times to remove any remaining vinegar or baking soda.
Step 6: Clean the Drip Tray
Remove the drip tray from the dispenser and wash it with warm, soapy water. Rinse and dry it thoroughly.
Step 7: Clean the Spout
Use a clean, empty water bottle to rinse the spout several times. If the spout has visible scale buildup, you can soak it in the vinegar solution for 15-30 minutes before rinsing.
Step 8: Clean the Filter (if applicable)
Depending on your Avanti water dispenser model, it may have a built-in filter. If so, check the filter’s lifespan and replace it if necessary. Consult your user manual for specific instructions on filter replacement.
Step 9: Reassemble and Fill
Once all the components are clean, reassemble the dispenser and fill the reservoir with fresh, clean water. Run the dispenser for a few minutes to flush out any remaining cleaning solution.
Step 10: Sanitize (optional)
For added sanitization, you can run a sanitizing solution through the dispenser. Consult your user manual for specific instructions on how to sanitize your dispenser model.
Additional Tips:
– Clean your Avanti water dispenser regularly, ideally every 2-3 months, to prevent the buildup of scale and bacteria.
– Use a soft cloth or sponge to avoid scratching the surface of the dispenser.
– If the vinegar or baking soda solution doesn’t remove all the buildup, you may need to use a commercial water dispenser cleaner. Follow the instructions on the product label carefully.
– If you notice the water tasting or smelling strange, clean the dispenser thoroughly and replace the filter (if applicable).
– If the dispenser is showing signs of wear or damage, such as cracks or leaks, have it inspected by a qualified technician.