primo water dispenser cleaning drip tray removal

To clean the drip tray of your Primo water dispenser‚ you will need to⁚

1. Gather your cleaning supplies.
2. Remove the drip tray.
3. Clean the drip tray.
4. Rinse and dry the drip tray.
5. Reinstall the drip tray.

Gather Your Cleaning Supplies

Before you begin cleaning the drip tray of your Primo water dispenser‚ you will need to gather your cleaning supplies. You will need the following⁚

• A mild dish soap
• A soft cloth or sponge
• A bucket or bowl of warm water
• A clean towel

Once you have gathered your cleaning supplies‚ you can proceed to the next step‚ which is removing the drip tray.

Remove the Drip Tray

To remove the drip tray from your Primo water dispenser‚ follow these steps⁚

1. Locate the drip tray at the bottom of the water dispenser.
2. Grasp the drip tray with both hands and pull it straight out towards you.
3. If the drip tray is stuck‚ gently wiggle it back and forth until it comes loose.
4. Once the drip tray is removed‚ you can proceed to the next step‚ which is cleaning the drip tray.

If you are having difficulty removing the drip tray‚ you can consult your Primo water dispenser’s user manual for specific instructions.

Clean the Drip Tray

To clean the drip tray of your Primo water dispenser‚ follow these steps⁚

1. Rinse the drip tray with warm water to remove any loose debris.
2. Fill the drip tray with a mixture of warm water and dish soap.
3. Let the drip tray soak for 10-15 minutes.
4. Use a soft cloth or sponge to gently scrub the drip tray‚ paying special attention to any areas with mineral buildup or stains.
5. Rinse the drip tray thoroughly with clean water;
6. Dry the drip tray completely with a clean towel.

If the drip tray is heavily soiled‚ you may need to use a stronger cleaning solution‚ such as a mixture of vinegar and water. Be sure to rinse the drip tray thoroughly after using any cleaning solution.

Rinse and Dry the Drip Tray

Once you have cleaned the drip tray‚ it is important to rinse and dry it thoroughly before reinstalling it in your Primo water dispenser. To do this‚ follow these steps⁚

1. Rinse the drip tray thoroughly with clean water to remove any remaining cleaning solution or debris.
2. Shake the drip tray to remove any excess water.
3. Use a clean towel to dry the drip tray completely.
4. Inspect the drip tray to make sure that it is clean and dry before reinstalling it.

By following these steps‚ you can help to keep your Primo water dispenser clean and functioning properly.

Reinstall the Drip Tray

Once the drip tray is clean and dry‚ it is time to reinstall it in your Primo water dispenser. To do this‚ follow these steps⁚

1. Align the drip tray with the tracks inside the water dispenser.
2. Slide the drip tray into place until it clicks into position.
3. Make sure that the drip tray is securely in place before using the water dispenser.

By following these steps‚ you can help to keep your Primo water dispenser clean and functioning properly.

Here are some additional tips for reinstalling the drip tray⁚

• If the drip tray is not properly aligned‚ it may not fit into place correctly.
• If the drip tray is not securely in place‚ it may leak water.
• It is important to clean the drip tray regularly to prevent the buildup of bacteria and mold.

By following these tips‚ you can help to keep your Primo water dispenser clean and safe to use.