How to Clean a NutriChef Water Dispenser

Introduction

A NutriChef water dispenser is a convenient and affordable way to have fresh, filtered water on demand. However, like all appliances, it needs to be cleaned regularly to keep it working properly and to prevent the growth of bacteria.

Cleaning the Exterior

The exterior of the NutriChef water dispenser can be cleaned with a damp cloth. Be sure to wring out the cloth so that it is not too wet, as water can damage the electrical components of the dispenser. You can also use a mild dish soap to remove any stubborn dirt or grime.

Cleaning the Water Tank

The water tank should be cleaned every few weeks, or more often if you notice that the water is starting to taste or smell bad. To clean the water tank, follow these steps:

1. Unplug the water dispenser and remove the water tank.
2. Empty the water tank and rinse it out with clean water.
3. Fill the water tank with a mixture of 1 cup of white vinegar and 1 gallon of water.
4. Let the mixture sit in the water tank for 30 minutes.
5. Rinse the water tank thoroughly with clean water.
6. Refill the water tank with fresh water and plug the water dispenser back in.

Cleaning the Filter

The filter should be replaced every 6 months, or more often if you notice that the water is starting to taste or smell bad. To replace the filter, follow these steps:

1. Unplug the water dispenser and remove the water tank.
2. Locate the filter housing at the bottom of the water tank.
3. Twist the filter housing counterclockwise to remove it.
4. Remove the old filter and insert a new one.
5. Tighten the filter housing clockwise.
6. Refill the water tank with fresh water and plug the water dispenser back in.

Troubleshooting

If you are having trouble with your NutriChef water dispenser, there are a few things you can try:

Make sure that the water dispenser is plugged in and that the power switch is turned on.
Check the water level in the water tank. If the water tank is empty, the water dispenser will not be able to dispense water.
Clean the filter. A dirty filter can restrict the flow of water and cause the water dispenser to make a loud noise.
Reset the water dispenser. To reset the water dispenser, unplug it for 30 seconds and then plug it back in.

Conclusion

Cleaning your NutriChef water dispenser is a simple and easy task that can help to keep your dispenser working properly and to prevent the growth of bacteria. By following the steps outlined in this article, you can keep your water dispenser clean and in good condition for years to come.

Additional Tips

If you have hard water, you may need to clean the water tank and filter more often.
You can use a water dispenser cleaning kit to help you clean your dispenser.
If you are having trouble cleaning your water dispenser, you can contact NutriChef customer service for assistance.