## Calibrating the KRFC704FSS Water Dispenser
The KRFC704FSS water dispenser is a high-quality appliance that can provide you with cold, refreshing water whenever you need it. However, like any other appliance, it is important to calibrate the dispenser regularly to ensure that it is functioning properly.
Here are the steps on how to calibrate the KRFC704FSS water dispenser:
1. Press and hold the “Dispense” button for 5 seconds. The dispenser will enter calibration mode and the LED display will flash.
2. Press the “Up” or “Down” button to adjust the water temperature. The temperature will be displayed on the LED display.
3. Once you have reached the desired temperature, press the “Dispense” button again to save the changes. The dispenser will exit calibration mode and the LED display will stop flashing.
Here are some additional tips for calibrating the KRFC704FSS water dispenser:
Use a thermometer to ensure that the water temperature is accurate.
Calibrate the dispenser regularly, especially if you notice that the water temperature is not consistent.
If you have any problems calibrating the dispenser, please contact a qualified technician.
## Troubleshooting the KRFC704FSS Water Dispenser
If you are having problems with your KRFC704FSS water dispenser, there are a few things you can do to troubleshoot the issue.
Check the power supply. Make sure that the dispenser is plugged into a working outlet and that the power cord is not damaged.
Check the water supply. Make sure that the dispenser is connected to a water source and that the water pressure is adequate.
Check the filter. The filter may need to be replaced if the water is not flowing properly or if the water has a bad taste or odor.
Check the dispenser nozzle. The nozzle may be clogged with debris, which can prevent the water from flowing properly.
Reset the dispenser. You can reset the dispenser by unplugging it from the power outlet and then plugging it back in.
If you have tried all of the above troubleshooting tips and the dispenser is still not working properly, please contact a qualified technician.
## Maintenance Tips for the KRFC704FSS Water Dispenser
To keep your KRFC704FSS water dispenser in good working condition, it is important to follow these maintenance tips:
Clean the dispenser regularly. Wipe down the exterior of the dispenser with a damp cloth and clean the interior of the dispenser with a mild soap solution.
Replace the filter regularly. The filter should be replaced every 6 months or as needed.
Decalcify the dispenser regularly. Decalcifying the dispenser will remove any mineral buildup that can clog the dispenser and prevent it from working properly.
Have the dispenser serviced by a qualified technician annually. A qualified technician can inspect the dispenser, clean it thoroughly, and make any necessary repairs.
By following these maintenance tips, you can help to keep your KRFC704FSS water dispenser in good working condition for many years to come.