## How to Take Design Off Bic Lighter
**Materials:**
* Bic lighter
* Rubbing alcohol
* Cotton balls or swabs
* Toothbrush
* Toothpaste
* Lighter fluid
**Safety Precautions:**
* Always work in a well-ventilated area.
* Avoid direct contact with rubbing alcohol on your skin.
* Do not smoke while performing this process.
**Instructions:**
**Step 1: Remove Lighter Fluid**
* Hold the lighter upside down and shake it vigorously to expel any remaining lighter fluid.
* If necessary, use a small screwdriver or needle to gently pry off the valve at the bottom of the lighter to release any remaining fluid.
**Step 2: Apply Rubbing Alcohol**
* Soak a cotton ball or swab in rubbing alcohol.
* Gently rub the alcohol onto the design of the lighter, making sure to cover all areas.
* Let the alcohol sit for a few minutes to dissolve the ink.
**Step 3: Scrub Away the Design**
* Use a toothbrush to gently scrub away the softened ink.
* Apply more rubbing alcohol to the toothbrush as needed.
* Avoid using excessive force, as you can damage the lighter’s surface.
**Step 4: Remove Stubborn Ink**
* If any ink remains, make a paste by mixing toothpaste with rubbing alcohol.
* Apply the paste to the stubborn ink and let it sit for about 10 minutes.
* Use the toothbrush to scrub away the paste and the remaining ink.
**Step 5: Clean the Lighter**
* Wipe down the lighter with a clean, damp cloth to remove any remaining alcohol or toothpaste.
* Let the lighter dry completely before using it again.
**Step 6: Refill with Lighter Fluid (Optional)**
* If you removed all the lighter fluid in Step 1, you will need to refill it before using it again.
* Hold the lighter upside down and insert the nozzle of the lighter fluid can into the valve.
* Press the nozzle down and hold it for about 5 seconds to release the fluid.
* Shake the lighter gently to distribute the fluid evenly.
## Other Methods:
### Using Nail Polish Remover
* **Caution:** This method is not recommended for use on plastic lighters, as the acetone in nail polish remover can damage or dissolve the material.
* Soak a cotton ball or swab in nail polish remover.
* Apply the remover to the design and gently rub it away.
* Use a clean cloth to wipe away the dissolved ink and remover.
### Using Hairspray
* Spray a generous amount of hairspray onto the design.
* Let the hairspray sit for a few minutes to soak into the ink.
* Use a cotton ball or swab to gently rub away the softened ink.
* Wipe down the lighter with a clean, damp cloth to remove any remaining hairspray.
## Tips:
* If the design is particularly intricate or stubborn, you may need to repeat the process multiple times.
* Be patient and gentle when removing the ink to avoid damaging the lighter.
* Test the chosen method on an inconspicuous area of the lighter before applying it to the entire surface.
* Dispose of used cotton balls or swabs properly to avoid spreading the dissolved ink.