## How to Replace an S-Trap Kitchen Sink
**Tools and Materials**
– Adjustable wrench
– Plumber’s putty
– Hacksaw
– Pry bar (optional)
– New s-trap with flange
– Gloves
– Bucket
**Safety Precautions**
– Turn off the water supply to the sink.
– Open the faucet to drain any remaining water.
– Wear gloves and safety glasses when handling sharp objects.
**Step 1: Remove the Old Trap**
– Place a bucket under the trap to catch any water or debris.
– Loosen the nuts that hold the trap to the sink drain and tailpiece. You may need to use an adjustable wrench.
– Carefully remove the old trap and discard it.
**Step 2: Prepare the Flange**
– Apply a thin bead of plumber’s putty around the inside of the flange on the new s-trap.
– Center the flange over the drain hole and press it into place.
**Step 3: Connect the Trap to the Sink Drain**
– Position the s-trap under the flange, rotating it to fit.
– Tighten the nuts that connect the trap to the flange and sink drain. Do not overtighten.
**Step 4: Connect the Trap to the Tailpiece**
– Apply a small amount of plumber’s putty to the end of the tailpiece.
– Insert the tailpiece into the other end of the s-trap and tighten the nut.
**Step 5: Cut the Tailpiece (Optional)**
– If the tailpiece is too long, you can use a hacksaw to cut it to the desired length.
– Make sure to cut it at a slight angle to ensure a proper seal.
**Step 6: Secure the Trap (Optional)**
– To prevent the trap from moving, you can secure it to the cabinet or wall using a zip tie or pry bar.
**Step 7: Tighten the Connections**
– Use an adjustable wrench to tighten all the nuts on the trap connections.
– Double-check that everything is secure and there are no leaks.
**Step 8: Turn on the Water Supply**
– Slowly turn on the water supply and check for leaks.
– If you see any leaks, tighten the connections or apply more plumber’s putty.
**Step 9: Clean Up**
– Wipe up any water or debris that may have spilled.
– Dispose of the old trap properly.
**Additional Tips**
– If the nuts are difficult to loosen, you can use a penetrating oil to help break them free.
– If the flange is cracked or damaged, you will need to replace it before installing the new trap.
– If you are not comfortable replacing the trap yourself, it is best to call a plumber for assistance.
## List of Tools and Materials
* Adjustable wrench
* Plumber’s putty
* Hacksaw
* Pry bar (optional)
* New s-trap with flange
* Gloves
* Bucket