## How to Move Plumbing for Kitchen Sink: A Step-by-Step Guide
Moving kitchen plumbing can be a daunting task, but with the right tools and know-how, it’s a project that can be completed in a weekend. This step-by-step guide will walk you through the process, from planning and preparation to finishing touches.
### Planning and Preparation
**1. Gather Your Tools and Materials:**
– **Pliers:** Adjustable, slip-joint, and needle-nose
– **Wrenches:** Basin, pipe, and adjustable
– **Screwdriver:** Phillips and flathead
– **Duct tape:** To hold pipes in place temporarily
– **PVC pipes and fittings:** To extend or reroute plumbing lines
– **SharkBite connectors:** For quick and easy connections
– **Teflon tape:** For sealing threaded connections
– **New sink:** If you’re replacing your sink
– **Faucet:** If you’re changing the faucet
– **Garbage disposal:** If you’re installing a garbage disposal
**2. Plan the New Location:**
– Choose a new location for your sink that works well with your kitchen layout and ergonomics.
– Measure the distance between the new sink location and the existing plumbing lines.
– Determine the length of PVC pipe you’ll need to extend or reroute the lines.
### Disconnecting the Existing Plumbing
**1. Turn Off the Water Supply:**
– Locate the main water shut-off valve for your house and turn it clockwise to close it.
– Open the faucets in the kitchen to release any remaining water from the lines.
**2. Disconnect the Drain:**
– Place a bucket under the sink to catch any water that may spill.
– Use pliers to loosen the slip-nut that connects the drain pipe to the sink.
– Carefully remove the drain pipe and keep it for later use.
**3. Disconnect the Water Supply Lines:**
– Use a basin wrench to loosen the nuts that connect the water supply lines to the sink and faucet.
– Gently pull the lines away from the sink, taking care not to damage the walls or flooring.
### Extending or Rerouting the Plumbing Lines
**1. Cut the PVC Pipe:**
– Measure and mark the length of PVC pipe you need for the new location.
– Use a hacksaw or pipe cutter to cut the pipe squarely.
**2. Dry-Fit the Connections:**
– Insert the PVC pipe into the fittings to ensure a snug fit.
– Apply Teflon tape to the threads of the fittings, wrapping it clockwise.
**3. Assemble the Plumbing Lines:**
– Insert the SharkBite connectors onto the ends of the PVC pipe.
– Connect the fittings to the existing plumbing lines.
– Use adjustable pliers to tighten the connections securely.
### Installing the New Sink
**1. Prepare the Sink Base:**
– Cut a hole in the sink base for the new sink.
– Secure the sink in place with the provided mounting hardware.
**2. Connect the Drain:**
– Attach the drain pipe to the sink drain hole using the slip-nut.
– Tighten the nut securely using pliers.
**3. Connect the Water Supply Lines:**
– Attach the water supply lines to the sink and faucet using the provided nuts.
– Tighten the nuts using a basin wrench.
### Finishing Touches
**1. Turn On the Water Supply:**
– Open the main water shut-off valve to restore water flow to the kitchen.
– Check for any leaks around the connections.
**2. Install the Faucet:**
– If you’re changing the faucet, install it according to the manufacturer’s instructions.
– Tighten the connections securely using a wrench.
**3. Install the Garbage Disposal:**
– If you’re installing a garbage disposal, follow the manufacturer’s instructions for installation and wiring.
**4. Test the Plumbing:**
– Run water through the sink and faucet to ensure everything is working properly.
– Check for any leaks or dripping around the connections.
**Tips for Success:**
– Take your time and work carefully to avoid mistakes.
– Measure twice, cut once.
– Use Teflon tape on all threaded connections to prevent leaks.
– If you encounter any problems, don’t hesitate to call a licensed plumber for assistance.
Moving kitchen plumbing can be a challenging but rewarding project. By following these steps and using the right tools and materials, you can successfully move your plumbing and create a kitchen that meets your needs.