## How to Install a Teka Double Kitchen Sink
Installing a new kitchen sink can be a great way to update the look of your kitchen and improve its functionality. If you’re looking for a high-quality sink that will last for years to come, Teka is a great option. Teka sinks are made from durable materials and come in a variety of styles to match any kitchen décor.
In this article, we’ll provide you with step-by-step instructions on how to install a Teka double kitchen sink. We’ll also provide you with some tips and tricks to make the installation process easier.
### Tools and Materials You’ll Need
Before you begin, you’ll need to gather the following tools and materials:
* Teka double kitchen sink
* Sink flange
* Sink strainer
* Plumber’s putty
* Silicone caulk
* Utility knife
* Measuring tape
* Level
* Pencil
* Drill
* Screwdriver
* Wrench
### Step-by-Step Instructions
**1. Remove the old sink.**
If you’re replacing an old sink, you’ll need to remove it before you can install the new one. To do this, turn off the water supply to the sink and disconnect the water lines. Then, use a utility knife to cut the silicone caulk around the sink. Once the caulk is cut, you can carefully remove the sink from the countertop.
**2. Clean the countertop.**
Once the old sink is removed, you’ll need to clean the countertop. Use a cleaner and degreaser to remove any dirt or grime from the surface. This will help to ensure that the new sink adheres properly to the countertop.
**3. Measure and mark the location of the new sink.**
Use a measuring tape to measure the distance between the two holes in the countertop. This will help you to determine the correct placement of the new sink. Once you have the measurements, mark the location of the holes on the countertop using a pencil.
**4. Install the sink flange.**
The sink flange is a metal ring that helps to seal the sink to the countertop. To install the sink flange, place it over the holes in the countertop and secure it with screws.
**5. Apply plumber’s putty to the sink.**
Plumber’s putty is a sealant that helps to prevent leaks around the sink. To apply plumber’s putty, roll it into a rope and place it around the rim of the sink.
**6. Set the sink in place.**
Carefully lift the sink into place and set it on the countertop. Make sure that the sink is aligned with the holes in the countertop.
**7. Tighten the sink bolts.**
The sink bolts are used to secure the sink to the countertop. To tighten the sink bolts, use a wrench to turn them clockwise.
**8. Connect the water lines.**
Reconnect the water lines to the sink. Make sure that the water lines are securely tightened.
**9. Apply silicone caulk around the sink.**
Silicone caulk is used to seal the gap between the sink and the countertop. To apply silicone caulk, use a caulk gun to apply a bead of caulk around the perimeter of the sink.
**10. Wipe away excess caulk.**
Use a damp cloth to wipe away any excess caulk.
### Tips and Tricks
* If you’re not confident in your ability to install the sink yourself, it’s best to hire a plumber to do the job for you.
* Make sure that the countertop is level before you install the sink. This will help to prevent leaks.
* Use a generous amount of plumber’s putty to seal the sink to the countertop.
* Allow the silicone caulk to dry completely before using the sink.
### Conclusion
Installing a Teka double kitchen sink is a relatively easy project that can be completed in a few hours. By following the steps outlined in this article, you can ensure that your new sink is installed properly and will last for years to come.