## How to Install a Kraus Kitchen Sink Strainer
Installing a Kraus kitchen sink strainer is a relatively simple task that can be completed in a few easy steps. By following these instructions, you can ensure that your strainer is properly installed and functioning correctly.
### Materials Needed
* Kraus kitchen sink strainer
* Plumber’s putty
* Adjustable wrench
* Screwdriver
### Step 1: Remove the Old Strainer
If there is an existing strainer in your sink, you will need to remove it before installing the new one. To do this, loosen the locknut that is holding the strainer in place. Once the locknut is loose, you can pull the strainer out of the sink.
### Step 2: Clean the Sink Hole
Once the old strainer is removed, you should clean the sink hole to remove any debris or sealant that may be present. This will help to ensure that the new strainer is installed properly and without any leaks.
### Step 3: Apply Plumber’s Putty
Apply a thin bead of plumber’s putty around the rim of the new strainer. Plumber’s putty will help to seal the strainer and prevent leaks.
### Step 4: Insert the Strainer
Insert the strainer into the sink hole. Make sure that the strainer is properly aligned and that the plumber’s putty is evenly distributed around the rim.
### Step 5: Tighten the Locknut
Tighten the locknut onto the strainer until it is snug. Do not overtighten the locknut, as this could damage the strainer or the sink.
### Step 6: Test the Strainer
Once the strainer is installed, turn on the water to test it. Make sure that there are no leaks around the rim of the strainer. If there are any leaks, tighten the locknut further.
### Tips
* If you are having difficulty tightening the locknut, you can use an adjustable wrench to help you.
* If you are installing a new sink, it is a good idea to install the strainer before setting the sink in place. This will make it easier to access the locknut.
* If you have any questions about installing a Kraus kitchen sink strainer, please consult the product instructions or contact a qualified plumber.
## Conclusion
By following these simple steps, you can easily install a Kraus kitchen sink strainer. This will help to keep your sink clean and free of debris.