## How to Fit a Corner Kitchen Sink
Fitting a corner kitchen sink can be a great way to save space and create a more efficient and stylish work area. Here is a step-by-step guide on how to fit a corner kitchen sink:
### Tools and Materials
Before you begin, you will need to gather the following tools and materials:
* Corner kitchen sink
* Wrench
* Screwdriver
* Plumber’s putty
* Teflon tape
* Silicone sealant
* Level
* Measuring tape
* Pencil
* Jigsaw
### Step 1: Prepare the Cabinetry
1. Remove the old sink, if there is one.
2. Cut out the hole for the new sink in the countertop. The hole should be the same size as the sink’s rim.
3. If the sink is undermount, apply a bead of silicone sealant around the edge of the hole.
4. Place the sink into the hole and press it firmly into place.
5. Wipe away any excess silicone sealant.
### Step 2: Install the Faucet
1. Install the faucet according to the manufacturer’s instructions.
2. Apply a bead of plumber’s putty around the base of the faucet.
3. Screw the faucet into place and tighten it with a wrench.
### Step 3: Connect the Water Supply Lines
1. Turn off the water supply to the sink.
2. Disconnect the old water supply lines from the faucet.
3. Connect the new water supply lines to the faucet.
4. Turn on the water supply and check for leaks.
### Step 4: Connect the Drain
1. Apply a bead of plumber’s putty around the drain opening.
2. Screw the drainpipe into the drain opening and tighten it with a wrench.
3. Connect the other end of the drainpipe to the drain trap.
### Step 5: Seal the Sink
1. Apply a bead of silicone sealant around the edge of the sink where it meets the countertop.
2. Smooth the sealant with your finger or a putty knife.
3. Allow the sealant to dry completely.
### Tips
* When cutting the hole for the sink, make sure to leave a small gap around the edges so that the sink can be easily removed if necessary.
* When installing the faucet, make sure to use Teflon tape on the threads to prevent leaks.
* When connecting the water supply lines, make sure to use a wrench to tighten the connections.
* When sealing the sink, make sure to use a silicone sealant that is specifically designed for use in kitchens.
### Conclusion
Fitting a corner kitchen sink is a relatively straightforward task that can be completed in a few hours. By following the steps outlined in this guide, you can easily save space and create a more efficient and stylish work area in your kitchen.