## How to Change Out a Kitchen Sink Handle
Replacing a kitchen sink handle is a relatively easy plumbing task that most homeowners can do themselves with a few basic tools. Here are the steps on how to change out a kitchen sink handle:
### Tools You’ll Need
* Adjustable wrench
* Allen wrench (if necessary)
* Screwdriver
* New sink handle
### Step-by-Step Instructions
#### 1. Turn off the water supply.
The first step is to turn off the water supply to the sink. This is typically done by turning the valves under the sink clockwise. If there are no valves under the sink, you will need to turn off the water supply to the entire house.
#### 2. Remove the old handle.
Once the water supply is turned off, you can remove the old handle. Most handles are held in place by a screw or bolt. Use an adjustable wrench or Allen wrench to loosen the screw or bolt and remove the handle.
#### 3. Remove the cartridge.
Once the handle is removed, you will need to remove the cartridge. The cartridge is the part of the faucet that controls the flow of water. To remove the cartridge, use an adjustable wrench to loosen the nut that holds it in place. Once the nut is loose, you can pull the cartridge out of the faucet.
#### 4. Install the new cartridge.
Take the new cartridge and insert it into the faucet. Tighten the nut that holds the cartridge in place with an adjustable wrench.
#### 5. Install the new handle.
Once the cartridge is installed, you can install the new handle. Insert the handle onto the stem of the faucet and tighten the screw or bolt that holds it in place.
#### 6. Turn on the water supply.
Once the new handle is installed, turn on the water supply to the sink. Check for leaks around the handle and the cartridge. If there are any leaks, tighten the nuts or screws that hold the handle and cartridge in place.
### Troubleshooting
If you encounter any problems while replacing a kitchen sink handle, here are some troubleshooting tips:
* If you cannot remove the old handle, try using a penetrating oil to loosen the screw or bolt.
* If you cannot remove the cartridge, try using a pair of pliers to loosen the nut.
* If there is a leak around the handle or cartridge, tighten the nuts or screws that hold them in place.
* If you are unable to fix the problem yourself, call a plumber.
### FAQs
**Q: How much does it cost to replace a kitchen sink handle?**
A: The cost to replace a kitchen sink handle will vary depending on the type of handle you choose. However, most handles cost between $20 and $50.
**Q: How long does it take to replace a kitchen sink handle?**
A: It should take no more than 30 minutes to replace a kitchen sink handle.
**Q: Can I replace a kitchen sink handle myself?**
A: Yes, most homeowners can replace a kitchen sink handle themselves with a few basic tools. However, if you are not comfortable working with plumbing, you can call a plumber to do the job for you.