## How to Remove a Porcelain Kitchen Sink
Removing a porcelain kitchen sink is a relatively simple task that can be completed in a few hours. However, it is important to take precautions to avoid damaging the sink or the surrounding countertop.
### Tools and Materials
* Adjustable wrench
* Phillips screwdriver
* Flathead screwdriver
* Putty knife
* Utility knife
* Caulk gun
* Caulk
* Plumber’s putty
* Bucket
* Rags
### Safety Precautions
* Wear safety glasses and gloves to protect yourself from broken glass or sharp edges.
* Turn off the water supply to the sink before beginning work.
* Disconnect the drain line from the sink.
* Support the sink from below to prevent it from falling when it is disconnected.
### Step-by-Step Instructions
1. **Remove the drain strainer.** Use a Phillips screwdriver to remove the screws that hold the drain strainer in place. Lift the strainer out of the sink.
2. **Disconnect the drain line.** Use an adjustable wrench to loosen the nuts that hold the drain line to the sink. Pull the drain line off of the sink.
3. **Remove the faucet.** Use a wrench to loosen the nuts that hold the faucet to the sink. Pull the faucet out of the sink.
4. **Loosen the sink clips.** Use a flathead screwdriver to loosen the screws that hold the sink clips to the countertop. The sink clips are usually located around the perimeter of the sink.
5. **Support the sink.** Place a bucket or other support under the sink to prevent it from falling when it is disconnected.
6. **Disconnect the sink from the countertop.** Carefully lift the sink up and off of the countertop.
7. **Clean the countertop.** Use a putty knife to remove any old caulk or sealant from the countertop. Wipe the countertop clean with a rag.
8. **Apply a bead of caulk to the countertop.** Use a caulk gun to apply a bead of caulk around the perimeter of the countertop where the sink will be installed.
9. **Place the sink on the countertop.** Carefully lower the sink onto the countertop. Make sure that the sink is centered and that the lip of the sink is flush with the countertop.
10. **Tighten the sink clips.** Use a flathead screwdriver to tighten the screws that hold the sink clips to the countertop.
11. **Reconnect the faucet.** Place the faucet in the sink and tighten the nuts that hold it in place.
12. **Reconnect the drain line.** Attach the drain line to the sink and tighten the nuts that hold it in place.
13. **Install the drain strainer.** Place the drain strainer in the sink and tighten the screws that hold it in place.
14. **Turn on the water supply and check for leaks.** Open the faucets and check for any leaks around the sink. If there are any leaks, tighten the nuts or screws that hold the sink or faucet in place.
### Tips
* If the sink is heavily caulked, you may need to use a utility knife to cut through the caulk.
* Be careful not to overtighten the sink clips, as this can damage the sink or the countertop.
* If you are replacing the sink with a new one, make sure that the new sink is the same size and shape as the old sink.
* If you are having difficulty removing the sink, you can contact a plumber for assistance.