## How to Reset a Kitchen Appliance Garage Door
A kitchen appliance garage door is a convenient way to hide away small appliances when not in use, but what do you do when it stops working? Respringing the door is a simple task that can be completed in a few minutes.
### Materials You’ll Need
* Screwdriver
* Allen wrench
* Pliers
### Step-by-Step Instructions
**1. Unplug the appliance garage door.**
This is an important safety precaution to take before you begin working on the door.
**2. Remove the screws that hold the front panel in place.**
There are typically two screws located at the top of the panel.
**3. Lift the front panel off of the door.**
Be careful not to damage the wires or springs that are attached to the panel.
**4. Locate the reset button.**
The reset button is usually a small, red button located on the motor housing.
**5. Press the reset button.**
Use the end of a pen or a toothpick to press the button.
**6. Reattach the front panel to the door.**
Align the panel with the screw holes and then tighten the screws.
**7. Plug the appliance garage door back in.**
Test the door to make sure that it is working properly.
### Troubleshooting Tips
If the door still does not work after you have reset it, there are a few things you can try:
* Check the power cord to make sure that it is plugged in securely.
* Check the fuse or circuit breaker to make sure that it has not blown.
* Inspect the wires and springs for any damage.
* Contact the manufacturer of the appliance garage door for further assistance.
### Safety Precautions
* Always unplug the appliance garage door before working on it.
* Be careful not to touch the wires or springs that are attached to the door.
* If you are not comfortable working on the door yourself, contact a qualified technician.
### Conclusion
Resetting a kitchen appliance garage door is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can get your door working properly again in no time.